Serving Nacogdoches & East Texas Mon–Fri 8am–5pm
Armor Insulation of East Texas Armor Insulationof East Texas
Home/Services/Spray Foam

Spray foam insulation that seals your building airtight

Spray polyurethane foam is the highest-performing insulation we install — it expands into every gap to form one continuous air and thermal barrier. For East Texas homes, shops, and barndominiums, nothing else comes close.

What it is

One material. A complete building envelope.

Spray foam (SPF) is a two-part chemical that's mixed at the tip of the gun and applied as a liquid. In seconds it expands and cures into rigid or semi-rigid foam that bonds to the surface and seals it — plywood, OSB, cinder block, metal framing, and poured foundations included.

Because it fills cracks and gaps that batts and blown-in simply bridge over, foam creates a seamless air barrier and vapor barrier in a single step. That's what makes a room feel dramatically more comfortable and hold its temperature.

  • Air + vapor barrier in one — stops drafts and controls moisture.
  • High R-value per inch — up to 7.6 R/in with closed cell.
  • New builds & retrofits — plus commercial and metal buildings.
Closed-cell foam in a finished metal building Sealed & coated · East Texas shop
Two kinds of foam

Open cell or closed cell?

We install both and help you choose. The short version:

 Open CellClosed Cell
R-value / inch~3.7~7.6
Density~0.5 lb/ft³ (soft, flexible)~2 lb/ft³ (dense, rigid)
Moisture barrierNoYes
Adds structural strengthNoYes
Best forSoundproofing, interior walls, budgetMetal buildings, tight cavities, extreme climates
Black-coated spray foam finish in a shop Coated foam · finished shop
Spray foam painting

A finish that's built to be seen

Raw foam works, but it isn't pretty. For shops, garages, and barndominiums, we coat the cured foam in a clean, durable finish — the crisp gray and black interiors you see across East Texas are ours.

A coating protects the foam, brightens the space, and turns a utility building into somewhere you actually want to spend time.

Good to know

The questions we hear most

Will it disrupt my house for days?

Very little. Most installs take one to two days depending on the structure, and we protect and clean the work area throughout.

Is spray foam a fire hazard in the walls?

Spray foam needs to be separated from living spaces by a code-approved thermal or ignition barrier — which is exactly the fire-protective coating we apply over it (see thermal protection). Every foam job we do is installed to code.

Will it cause dampness or corrode my wiring?

No. The foam is hydrophobic — it sheds water rather than holding it — and it doesn't react with the plastic coating on electrical cabling.

Does it shrink and lose performance over time?

There's minor initial shrinkage, but independent testing has found 15- and 20-year-old foam performing on par with new foam. It's a long-term investment.

Free, no-pressure estimate

Ready to make your home or shop more comfortable?

Tell us about your space and we'll give you an honest recommendation and a written quote — no obligation.